source: projects/vine-manual-base/trunk/doc/Makefile.in @ 4189

Revision 4189, 10.4 KB checked in by yasumichi, 13 years ago (diff)

メニューの幅を web と local で変更
Line 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkglibexecdir = $(libexecdir)/@PACKAGE@
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24install_sh_DATA = $(install_sh) -c -m 644
25install_sh_PROGRAM = $(install_sh) -c
26install_sh_SCRIPT = $(install_sh) -c
27INSTALL_HEADER = $(INSTALL_DATA)
28transform = $(program_transform_name)
29NORMAL_INSTALL = :
30PRE_INSTALL = :
31POST_INSTALL = :
32NORMAL_UNINSTALL = :
33PRE_UNINSTALL = :
34POST_UNINSTALL = :
35subdir = doc
36DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
37        $(srcdir)/index.html.in
38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39am__aclocal_m4_deps = $(top_srcdir)/configure.ac
40am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
41        $(ACLOCAL_M4)
42mkinstalldirs = $(install_sh) -d
43CONFIG_CLEAN_FILES = index.html
44CONFIG_CLEAN_VPATH_FILES =
45SOURCES =
46DIST_SOURCES =
47am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
48am__vpath_adj = case $$p in \
49    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
50    *) f=$$p;; \
51  esac;
52am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
53am__install_max = 40
54am__nobase_strip_setup = \
55  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
56am__nobase_strip = \
57  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
58am__nobase_list = $(am__nobase_strip_setup); \
59  for p in $$list; do echo "$$p $$p"; done | \
60  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
61  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
62    if (++n[$$2] == $(am__install_max)) \
63      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
64    END { for (dir in files) print dir, files[dir] }'
65am__base_list = \
66  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
67  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
68am__installdirs = "$(DESTDIR)$(docdir)"
69DATA = $(doc_DATA)
70DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
71ACLOCAL = @ACLOCAL@
72AMTAR = @AMTAR@
73AUTOCONF = @AUTOCONF@
74AUTOHEADER = @AUTOHEADER@
75AUTOMAKE = @AUTOMAKE@
76AWK = @AWK@
77CSS = @CSS@
78CSSDIR = @CSSDIR@
79CSSURI = @CSSURI@
80CVSDATA = @CVSDATA@
81CYGPATH_W = @CYGPATH_W@
82DEFS = @DEFS@
83ECHO_C = @ECHO_C@
84ECHO_N = @ECHO_N@
85ECHO_T = @ECHO_T@
86IMAGEDIR = @IMAGEDIR@
87IMAGEURI = @IMAGEURI@
88INDEX = @INDEX@
89INSTALL = @INSTALL@
90INSTALL_DATA = @INSTALL_DATA@
91INSTALL_PROGRAM = @INSTALL_PROGRAM@
92INSTALL_SCRIPT = @INSTALL_SCRIPT@
93INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
94LIBOBJS = @LIBOBJS@
95LIBS = @LIBS@
96LTLIBOBJS = @LTLIBOBJS@
97MAKEINFO = @MAKEINFO@
98MENUWIDTH = @MENUWIDTH@
99MKDIR_P = @MKDIR_P@
100MKTEMP = @MKTEMP@
101MODE = @MODE@
102PACKAGE = @PACKAGE@
103PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
104PACKAGE_NAME = @PACKAGE_NAME@
105PACKAGE_STRING = @PACKAGE_STRING@
106PACKAGE_TARNAME = @PACKAGE_TARNAME@
107PACKAGE_URL = @PACKAGE_URL@
108PACKAGE_VERSION = @PACKAGE_VERSION@
109PATH_SEPARATOR = @PATH_SEPARATOR@
110SET_MAKE = @SET_MAKE@
111SHELL = @SHELL@
112STRIP = @STRIP@
113TEMPLATE = @TEMPLATE@
114VERSION = @VERSION@
115VMDIR = @VMDIR@
116VMURI = @VMURI@
117abs_builddir = @abs_builddir@
118abs_srcdir = @abs_srcdir@
119abs_top_builddir = @abs_top_builddir@
120abs_top_srcdir = @abs_top_srcdir@
121am__leading_dot = @am__leading_dot@
122am__tar = @am__tar@
123am__untar = @am__untar@
124bindir = @bindir@
125build_alias = @build_alias@
126builddir = @builddir@
127datadir = @datadir@
128datarootdir = @datarootdir@
129docdir = @VMDIR@
130dvidir = @dvidir@
131exec_prefix = @exec_prefix@
132host_alias = @host_alias@
133htmldir = @htmldir@
134includedir = @includedir@
135infodir = @infodir@
136install_sh = @install_sh@
137libdir = @libdir@
138libexecdir = @libexecdir@
139localedir = @localedir@
140localstatedir = @localstatedir@
141mandir = @mandir@
142mkdir_p = @mkdir_p@
143oldincludedir = @oldincludedir@
144pdfdir = @pdfdir@
145prefix = @prefix@
146program_transform_name = @program_transform_name@
147psdir = @psdir@
148sbindir = @sbindir@
149sharedstatedir = @sharedstatedir@
150srcdir = @srcdir@
151sysconfdir = @sysconfdir@
152target_alias = @target_alias@
153top_build_prefix = @top_build_prefix@
154top_builddir = @top_builddir@
155top_srcdir = @top_srcdir@
156doc_DATA = index.html
157all: all-am
158
159.SUFFIXES:
160$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
161        @for dep in $?; do \
162          case '$(am__configure_deps)' in \
163            *$$dep*) \
164              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
165                && { if test -f $@; then exit 0; else break; fi; }; \
166              exit 1;; \
167          esac; \
168        done; \
169        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
170        $(am__cd) $(top_srcdir) && \
171          $(AUTOMAKE) --gnu doc/Makefile
172.PRECIOUS: Makefile
173Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
174        @case '$?' in \
175          *config.status*) \
176            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
177          *) \
178            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
179            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
180        esac;
181
182$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
183        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
184
185$(top_srcdir)/configure:  $(am__configure_deps)
186        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
187$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
188        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
189$(am__aclocal_m4_deps):
190index.html: $(top_builddir)/config.status $(srcdir)/index.html.in
191        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
192install-docDATA: $(doc_DATA)
193        @$(NORMAL_INSTALL)
194        test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
195        @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
196        for p in $$list; do \
197          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
198          echo "$$d$$p"; \
199        done | $(am__base_list) | \
200        while read files; do \
201          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
202          $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
203        done
204
205uninstall-docDATA:
206        @$(NORMAL_UNINSTALL)
207        @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
208        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
209        test -n "$$files" || exit 0; \
210        echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
211        cd "$(DESTDIR)$(docdir)" && rm -f $$files
212tags: TAGS
213TAGS:
214
215ctags: CTAGS
216CTAGS:
217
218
219distdir: $(DISTFILES)
220        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
221        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
222        list='$(DISTFILES)'; \
223          dist_files=`for file in $$list; do echo $$file; done | \
224          sed -e "s|^$$srcdirstrip/||;t" \
225              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
226        case $$dist_files in \
227          */*) $(MKDIR_P) `echo "$$dist_files" | \
228                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
229                           sort -u` ;; \
230        esac; \
231        for file in $$dist_files; do \
232          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
233          if test -d $$d/$$file; then \
234            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
235            if test -d "$(distdir)/$$file"; then \
236              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
237            fi; \
238            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
239              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
240              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
241            fi; \
242            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
243          else \
244            test -f "$(distdir)/$$file" \
245            || cp -p $$d/$$file "$(distdir)/$$file" \
246            || exit 1; \
247          fi; \
248        done
249check-am: all-am
250check: check-am
251all-am: Makefile $(DATA)
252installdirs:
253        for dir in "$(DESTDIR)$(docdir)"; do \
254          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
255        done
256install: install-am
257install-exec: install-exec-am
258install-data: install-data-am
259uninstall: uninstall-am
260
261install-am: all-am
262        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
263
264installcheck: installcheck-am
265install-strip:
266        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
267          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
268          `test -z '$(STRIP)' || \
269            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
270mostlyclean-generic:
271
272clean-generic:
273
274distclean-generic:
275        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
276        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
277
278maintainer-clean-generic:
279        @echo "This command is intended for maintainers to use"
280        @echo "it deletes files that may require special tools to rebuild."
281clean: clean-am
282
283clean-am: clean-generic mostlyclean-am
284
285distclean: distclean-am
286        -rm -f Makefile
287distclean-am: clean-am distclean-generic
288
289dvi: dvi-am
290
291dvi-am:
292
293html: html-am
294
295html-am:
296
297info: info-am
298
299info-am:
300
301install-data-am: install-docDATA
302
303install-dvi: install-dvi-am
304
305install-dvi-am:
306
307install-exec-am:
308
309install-html: install-html-am
310
311install-html-am:
312
313install-info: install-info-am
314
315install-info-am:
316
317install-man:
318
319install-pdf: install-pdf-am
320
321install-pdf-am:
322
323install-ps: install-ps-am
324
325install-ps-am:
326
327installcheck-am:
328
329maintainer-clean: maintainer-clean-am
330        -rm -f Makefile
331maintainer-clean-am: distclean-am maintainer-clean-generic
332
333mostlyclean: mostlyclean-am
334
335mostlyclean-am: mostlyclean-generic
336
337pdf: pdf-am
338
339pdf-am:
340
341ps: ps-am
342
343ps-am:
344
345uninstall-am: uninstall-docDATA
346
347.MAKE: install-am install-strip
348
349.PHONY: all all-am check check-am clean clean-generic distclean \
350        distclean-generic distdir dvi dvi-am html html-am info info-am \
351        install install-am install-data install-data-am \
352        install-docDATA install-dvi install-dvi-am install-exec \
353        install-exec-am install-html install-html-am install-info \
354        install-info-am install-man install-pdf install-pdf-am \
355        install-ps install-ps-am install-strip installcheck \
356        installcheck-am installdirs maintainer-clean \
357        maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
358        pdf-am ps ps-am uninstall uninstall-am uninstall-docDATA
359
360
361# Tell versions [3.59,3.63) of GNU make to not export all variables.
362# Otherwise a system limit (for SysV at least) may be exceeded.
363.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.