source: projects/vine-desktop-guide/trunk/help/Makefile.in @ 6282

Revision 6282, 19.3 KB checked in by yasumichi, 12 years ago (diff)

delete shutdown.xml
Line 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkglibexecdir = $(libexecdir)/@PACKAGE@
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24install_sh_DATA = $(install_sh) -c -m 644
25install_sh_PROGRAM = $(install_sh) -c
26install_sh_SCRIPT = $(install_sh) -c
27INSTALL_HEADER = $(INSTALL_DATA)
28transform = $(program_transform_name)
29NORMAL_INSTALL = :
30PRE_INSTALL = :
31POST_INSTALL = :
32NORMAL_UNINSTALL = :
33PRE_UNINSTALL = :
34POST_UNINSTALL = :
35subdir = help
36DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
37        $(srcdir)/vine-desktop-guide-ja.omf.in
38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39am__aclocal_m4_deps = $(top_srcdir)/configure.ac
40am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
41        $(ACLOCAL_M4)
42mkinstalldirs = $(install_sh) -d
43CONFIG_CLEAN_FILES = vine-desktop-guide-ja.omf
44CONFIG_CLEAN_VPATH_FILES =
45SOURCES =
46DIST_SOURCES =
47RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
48        html-recursive info-recursive install-data-recursive \
49        install-dvi-recursive install-exec-recursive \
50        install-html-recursive install-info-recursive \
51        install-pdf-recursive install-ps-recursive install-recursive \
52        installcheck-recursive installdirs-recursive pdf-recursive \
53        ps-recursive uninstall-recursive
54am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
55am__vpath_adj = case $$p in \
56    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
57    *) f=$$p;; \
58  esac;
59am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
60am__install_max = 40
61am__nobase_strip_setup = \
62  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
63am__nobase_strip = \
64  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
65am__nobase_list = $(am__nobase_strip_setup); \
66  for p in $$list; do echo "$$p $$p"; done | \
67  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
68  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
69    if (++n[$$2] == $(am__install_max)) \
70      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
71    END { for (dir in files) print dir, files[dir] }'
72am__base_list = \
73  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
74  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
75am__installdirs = "$(DESTDIR)$(omfdir)" "$(DESTDIR)$(xmldir)"
76DATA = $(omf_DATA) $(xml_DATA)
77RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
78  distclean-recursive maintainer-clean-recursive
79AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
80        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
81        distdir
82ETAGS = etags
83CTAGS = ctags
84DIST_SUBDIRS = $(SUBDIRS)
85DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
86am__relativize = \
87  dir0=`pwd`; \
88  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
89  sed_rest='s,^[^/]*/*,,'; \
90  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
91  sed_butlast='s,/*[^/]*$$,,'; \
92  while test -n "$$dir1"; do \
93    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
94    if test "$$first" != "."; then \
95      if test "$$first" = ".."; then \
96        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
97        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
98      else \
99        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
100        if test "$$first2" = "$$first"; then \
101          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
102        else \
103          dir2="../$$dir2"; \
104        fi; \
105        dir0="$$dir0"/"$$first"; \
106      fi; \
107    fi; \
108    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
109  done; \
110  reldir="$$dir2"
111ACLOCAL = @ACLOCAL@
112AMTAR = @AMTAR@
113AUTOCONF = @AUTOCONF@
114AUTOHEADER = @AUTOHEADER@
115AUTOMAKE = @AUTOMAKE@
116AWK = @AWK@
117CYGPATH_W = @CYGPATH_W@
118DEFS = @DEFS@
119ECHO_C = @ECHO_C@
120ECHO_N = @ECHO_N@
121ECHO_T = @ECHO_T@
122INSTALL = @INSTALL@
123INSTALL_DATA = @INSTALL_DATA@
124INSTALL_PROGRAM = @INSTALL_PROGRAM@
125INSTALL_SCRIPT = @INSTALL_SCRIPT@
126INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
127LIBOBJS = @LIBOBJS@
128LIBS = @LIBS@
129LTLIBOBJS = @LTLIBOBJS@
130MAKEINFO = @MAKEINFO@
131MKDIR_P = @MKDIR_P@
132OMFDIR = @OMFDIR@
133PACKAGE = @PACKAGE@
134PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
135PACKAGE_NAME = @PACKAGE_NAME@
136PACKAGE_STRING = @PACKAGE_STRING@
137PACKAGE_TARNAME = @PACKAGE_TARNAME@
138PACKAGE_URL = @PACKAGE_URL@
139PACKAGE_VERSION = @PACKAGE_VERSION@
140PATH_SEPARATOR = @PATH_SEPARATOR@
141PKG_CONFIG = @PKG_CONFIG@
142PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
143PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
144SET_MAKE = @SET_MAKE@
145SHELL = @SHELL@
146STRIP = @STRIP@
147VERSION = @VERSION@
148VMDIR = @VMDIR@
149abs_builddir = @abs_builddir@
150abs_srcdir = @abs_srcdir@
151abs_top_builddir = @abs_top_builddir@
152abs_top_srcdir = @abs_top_srcdir@
153am__leading_dot = @am__leading_dot@
154am__tar = @am__tar@
155am__untar = @am__untar@
156bindir = @bindir@
157build_alias = @build_alias@
158builddir = @builddir@
159datadir = @datadir@
160datarootdir = @datarootdir@
161docdir = @docdir@
162dvidir = @dvidir@
163exec_prefix = @exec_prefix@
164host_alias = @host_alias@
165htmldir = @htmldir@
166includedir = @includedir@
167infodir = @infodir@
168install_sh = @install_sh@
169libdir = @libdir@
170libexecdir = @libexecdir@
171localedir = @localedir@
172localstatedir = @localstatedir@
173mandir = @mandir@
174mkdir_p = @mkdir_p@
175oldincludedir = @oldincludedir@
176pdfdir = @pdfdir@
177prefix = @prefix@
178program_transform_name = @program_transform_name@
179psdir = @psdir@
180sbindir = @sbindir@
181sharedstatedir = @sharedstatedir@
182srcdir = @srcdir@
183sysconfdir = @sysconfdir@
184target_alias = @target_alias@
185top_build_prefix = @top_build_prefix@
186top_builddir = @top_builddir@
187top_srcdir = @top_srcdir@
188SUBDIRS = figures
189@NO_WEB_TRUE@omf_DATA = vine-desktop-guide-ja.omf
190@NO_WEB_TRUE@omfdir = @OMFDIR@
191@NO_WEB_TRUE@xml_DATA = accessibility-features.xml \
192@NO_WEB_TRUE@      accessories.xml \
193@NO_WEB_TRUE@      boot.xml \
194@NO_WEB_TRUE@      gnome-basic.xml \
195@NO_WEB_TRUE@      graphics.xml \
196@NO_WEB_TRUE@      gui-alternatives.xml \
197@NO_WEB_TRUE@      internet.xml \
198@NO_WEB_TRUE@      legal.xml \
199@NO_WEB_TRUE@      login.xml \
200@NO_WEB_TRUE@      logout.xml \
201@NO_WEB_TRUE@      office.xml \
202@NO_WEB_TRUE@      preferences.xml \
203@NO_WEB_TRUE@      recruitment.xml \
204@NO_WEB_TRUE@      rules.xml \
205@NO_WEB_TRUE@      sound-video.xml \
206@NO_WEB_TRUE@      synaptic.xml \
207@NO_WEB_TRUE@      system-config.xml \
208@NO_WEB_TRUE@      system-tool.xml \
209@NO_WEB_TRUE@      update-watch.xml \
210@NO_WEB_TRUE@      vine-app-install.xml \
211@NO_WEB_TRUE@      vine-plus-guide.xml \
212@NO_WEB_TRUE@      vine-desktop-guide.xml
213
214@NO_WEB_TRUE@xmldir = @VMDIR@/desktop-guide
215EXTRA_DIST = $(xml_DATA)
216CLEANFILES = *.html
217all: all-recursive
218
219.SUFFIXES:
220$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
221        @for dep in $?; do \
222          case '$(am__configure_deps)' in \
223            *$$dep*) \
224              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
225                && { if test -f $@; then exit 0; else break; fi; }; \
226              exit 1;; \
227          esac; \
228        done; \
229        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \
230        $(am__cd) $(top_srcdir) && \
231          $(AUTOMAKE) --gnu help/Makefile
232.PRECIOUS: Makefile
233Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
234        @case '$?' in \
235          *config.status*) \
236            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
237          *) \
238            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
239            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
240        esac;
241
242$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
243        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
244
245$(top_srcdir)/configure:  $(am__configure_deps)
246        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
247$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
248        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
249$(am__aclocal_m4_deps):
250vine-desktop-guide-ja.omf: $(top_builddir)/config.status $(srcdir)/vine-desktop-guide-ja.omf.in
251        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
252install-omfDATA: $(omf_DATA)
253        @$(NORMAL_INSTALL)
254        test -z "$(omfdir)" || $(MKDIR_P) "$(DESTDIR)$(omfdir)"
255        @list='$(omf_DATA)'; test -n "$(omfdir)" || list=; \
256        for p in $$list; do \
257          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
258          echo "$$d$$p"; \
259        done | $(am__base_list) | \
260        while read files; do \
261          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(omfdir)'"; \
262          $(INSTALL_DATA) $$files "$(DESTDIR)$(omfdir)" || exit $$?; \
263        done
264
265uninstall-omfDATA:
266        @$(NORMAL_UNINSTALL)
267        @list='$(omf_DATA)'; test -n "$(omfdir)" || list=; \
268        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
269        test -n "$$files" || exit 0; \
270        echo " ( cd '$(DESTDIR)$(omfdir)' && rm -f" $$files ")"; \
271        cd "$(DESTDIR)$(omfdir)" && rm -f $$files
272install-xmlDATA: $(xml_DATA)
273        @$(NORMAL_INSTALL)
274        test -z "$(xmldir)" || $(MKDIR_P) "$(DESTDIR)$(xmldir)"
275        @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
276        for p in $$list; do \
277          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
278          echo "$$d$$p"; \
279        done | $(am__base_list) | \
280        while read files; do \
281          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xmldir)'"; \
282          $(INSTALL_DATA) $$files "$(DESTDIR)$(xmldir)" || exit $$?; \
283        done
284
285uninstall-xmlDATA:
286        @$(NORMAL_UNINSTALL)
287        @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
288        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
289        test -n "$$files" || exit 0; \
290        echo " ( cd '$(DESTDIR)$(xmldir)' && rm -f" $$files ")"; \
291        cd "$(DESTDIR)$(xmldir)" && rm -f $$files
292
293# This directory's subdirectories are mostly independent; you can cd
294# into them and run `make' without going through this Makefile.
295# To change the values of `make' variables: instead of editing Makefiles,
296# (1) if the variable is set in `config.status', edit `config.status'
297#     (which will cause the Makefiles to be regenerated when you run `make');
298# (2) otherwise, pass the desired values on the `make' command line.
299$(RECURSIVE_TARGETS):
300        @fail= failcom='exit 1'; \
301        for f in x $$MAKEFLAGS; do \
302          case $$f in \
303            *=* | --[!k]*);; \
304            *k*) failcom='fail=yes';; \
305          esac; \
306        done; \
307        dot_seen=no; \
308        target=`echo $@ | sed s/-recursive//`; \
309        list='$(SUBDIRS)'; for subdir in $$list; do \
310          echo "Making $$target in $$subdir"; \
311          if test "$$subdir" = "."; then \
312            dot_seen=yes; \
313            local_target="$$target-am"; \
314          else \
315            local_target="$$target"; \
316          fi; \
317          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
318          || eval $$failcom; \
319        done; \
320        if test "$$dot_seen" = "no"; then \
321          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
322        fi; test -z "$$fail"
323
324$(RECURSIVE_CLEAN_TARGETS):
325        @fail= failcom='exit 1'; \
326        for f in x $$MAKEFLAGS; do \
327          case $$f in \
328            *=* | --[!k]*);; \
329            *k*) failcom='fail=yes';; \
330          esac; \
331        done; \
332        dot_seen=no; \
333        case "$@" in \
334          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
335          *) list='$(SUBDIRS)' ;; \
336        esac; \
337        rev=''; for subdir in $$list; do \
338          if test "$$subdir" = "."; then :; else \
339            rev="$$subdir $$rev"; \
340          fi; \
341        done; \
342        rev="$$rev ."; \
343        target=`echo $@ | sed s/-recursive//`; \
344        for subdir in $$rev; do \
345          echo "Making $$target in $$subdir"; \
346          if test "$$subdir" = "."; then \
347            local_target="$$target-am"; \
348          else \
349            local_target="$$target"; \
350          fi; \
351          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
352          || eval $$failcom; \
353        done && test -z "$$fail"
354tags-recursive:
355        list='$(SUBDIRS)'; for subdir in $$list; do \
356          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
357        done
358ctags-recursive:
359        list='$(SUBDIRS)'; for subdir in $$list; do \
360          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
361        done
362
363ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
364        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
365        unique=`for i in $$list; do \
366            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
367          done | \
368          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
369              END { if (nonempty) { for (i in files) print i; }; }'`; \
370        mkid -fID $$unique
371tags: TAGS
372
373TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
374                $(TAGS_FILES) $(LISP)
375        set x; \
376        here=`pwd`; \
377        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
378          include_option=--etags-include; \
379          empty_fix=.; \
380        else \
381          include_option=--include; \
382          empty_fix=; \
383        fi; \
384        list='$(SUBDIRS)'; for subdir in $$list; do \
385          if test "$$subdir" = .; then :; else \
386            test ! -f $$subdir/TAGS || \
387              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
388          fi; \
389        done; \
390        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
391        unique=`for i in $$list; do \
392            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
393          done | \
394          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
395              END { if (nonempty) { for (i in files) print i; }; }'`; \
396        shift; \
397        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
398          test -n "$$unique" || unique=$$empty_fix; \
399          if test $$# -gt 0; then \
400            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
401              "$$@" $$unique; \
402          else \
403            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
404              $$unique; \
405          fi; \
406        fi
407ctags: CTAGS
408CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
409                $(TAGS_FILES) $(LISP)
410        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
411        unique=`for i in $$list; do \
412            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
413          done | \
414          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
415              END { if (nonempty) { for (i in files) print i; }; }'`; \
416        test -z "$(CTAGS_ARGS)$$unique" \
417          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
418             $$unique
419
420GTAGS:
421        here=`$(am__cd) $(top_builddir) && pwd` \
422          && $(am__cd) $(top_srcdir) \
423          && gtags -i $(GTAGS_ARGS) "$$here"
424
425distclean-tags:
426        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
427
428distdir: $(DISTFILES)
429        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
430        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
431        list='$(DISTFILES)'; \
432          dist_files=`for file in $$list; do echo $$file; done | \
433          sed -e "s|^$$srcdirstrip/||;t" \
434              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
435        case $$dist_files in \
436          */*) $(MKDIR_P) `echo "$$dist_files" | \
437                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
438                           sort -u` ;; \
439        esac; \
440        for file in $$dist_files; do \
441          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
442          if test -d $$d/$$file; then \
443            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
444            if test -d "$(distdir)/$$file"; then \
445              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
446            fi; \
447            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
448              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
449              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
450            fi; \
451            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
452          else \
453            test -f "$(distdir)/$$file" \
454            || cp -p $$d/$$file "$(distdir)/$$file" \
455            || exit 1; \
456          fi; \
457        done
458        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
459          if test "$$subdir" = .; then :; else \
460            test -d "$(distdir)/$$subdir" \
461            || $(MKDIR_P) "$(distdir)/$$subdir" \
462            || exit 1; \
463          fi; \
464        done
465        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
466          if test "$$subdir" = .; then :; else \
467            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
468            $(am__relativize); \
469            new_distdir=$$reldir; \
470            dir1=$$subdir; dir2="$(top_distdir)"; \
471            $(am__relativize); \
472            new_top_distdir=$$reldir; \
473            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
474            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
475            ($(am__cd) $$subdir && \
476              $(MAKE) $(AM_MAKEFLAGS) \
477                top_distdir="$$new_top_distdir" \
478                distdir="$$new_distdir" \
479                am__remove_distdir=: \
480                am__skip_length_check=: \
481                am__skip_mode_fix=: \
482                distdir) \
483              || exit 1; \
484          fi; \
485        done
486check-am: all-am
487check: check-recursive
488all-am: Makefile $(DATA)
489installdirs: installdirs-recursive
490installdirs-am:
491        for dir in "$(DESTDIR)$(omfdir)" "$(DESTDIR)$(xmldir)"; do \
492          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
493        done
494install: install-recursive
495install-exec: install-exec-recursive
496install-data: install-data-recursive
497uninstall: uninstall-recursive
498
499install-am: all-am
500        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
501
502installcheck: installcheck-recursive
503install-strip:
504        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
505          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
506          `test -z '$(STRIP)' || \
507            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
508mostlyclean-generic:
509
510clean-generic:
511        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
512
513distclean-generic:
514        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
515        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
516
517maintainer-clean-generic:
518        @echo "This command is intended for maintainers to use"
519        @echo "it deletes files that may require special tools to rebuild."
520clean: clean-recursive
521
522clean-am: clean-generic mostlyclean-am
523
524distclean: distclean-recursive
525        -rm -f Makefile
526distclean-am: clean-am distclean-generic distclean-tags
527
528dvi: dvi-recursive
529
530dvi-am:
531
532html-am:
533
534info: info-recursive
535
536info-am:
537
538install-data-am: install-omfDATA install-xmlDATA
539
540install-dvi: install-dvi-recursive
541
542install-dvi-am:
543
544install-exec-am:
545
546install-html-am:
547
548install-info: install-info-recursive
549
550install-info-am:
551
552install-man:
553
554install-pdf: install-pdf-recursive
555
556install-pdf-am:
557
558install-ps: install-ps-recursive
559
560install-ps-am:
561
562installcheck-am:
563
564maintainer-clean: maintainer-clean-recursive
565        -rm -f Makefile
566maintainer-clean-am: distclean-am maintainer-clean-generic
567
568mostlyclean: mostlyclean-recursive
569
570mostlyclean-am: mostlyclean-generic
571
572pdf: pdf-recursive
573
574pdf-am:
575
576ps: ps-recursive
577
578ps-am:
579
580uninstall-am: uninstall-omfDATA uninstall-xmlDATA
581
582.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
583        install-am install-strip tags-recursive
584
585.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
586        all all-am check check-am clean clean-generic ctags \
587        ctags-recursive distclean distclean-generic distclean-tags \
588        distdir dvi dvi-am html html-am info info-am install \
589        install-am install-data install-data-am install-dvi \
590        install-dvi-am install-exec install-exec-am install-html \
591        install-html-am install-info install-info-am install-man \
592        install-omfDATA install-pdf install-pdf-am install-ps \
593        install-ps-am install-strip install-xmlDATA installcheck \
594        installcheck-am installdirs installdirs-am maintainer-clean \
595        maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
596        pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
597        uninstall-omfDATA uninstall-xmlDATA
598
599
600html:
601        vine-manual-build vine-desktop-guide.xml
602
603install-html:
604        $(INSTALL) -d $(DESTDIR)$(xmldir)
605        $(INSTALL) -m 644 *.html $(DESTDIR)$(xmldir)
606
607# Tell versions [3.59,3.63) of GNU make to not export all variables.
608# Otherwise a system limit (for SysV at least) may be exceeded.
609.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.