source: projects/vine-desktop-guide/trunk/help/Makefile.in @ 4435

Revision 4435, 19.3 KB checked in by yasumichi, 13 years ago (diff)

バージョン番号を変更
Line 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkglibexecdir = $(libexecdir)/@PACKAGE@
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24install_sh_DATA = $(install_sh) -c -m 644
25install_sh_PROGRAM = $(install_sh) -c
26install_sh_SCRIPT = $(install_sh) -c
27INSTALL_HEADER = $(INSTALL_DATA)
28transform = $(program_transform_name)
29NORMAL_INSTALL = :
30PRE_INSTALL = :
31POST_INSTALL = :
32NORMAL_UNINSTALL = :
33PRE_UNINSTALL = :
34POST_UNINSTALL = :
35subdir = help
36DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
37        $(srcdir)/vine-desktop-guide-ja.omf.in
38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39am__aclocal_m4_deps = $(top_srcdir)/configure.ac
40am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
41        $(ACLOCAL_M4)
42mkinstalldirs = $(install_sh) -d
43CONFIG_CLEAN_FILES = vine-desktop-guide-ja.omf
44CONFIG_CLEAN_VPATH_FILES =
45SOURCES =
46DIST_SOURCES =
47RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
48        html-recursive info-recursive install-data-recursive \
49        install-dvi-recursive install-exec-recursive \
50        install-html-recursive install-info-recursive \
51        install-pdf-recursive install-ps-recursive install-recursive \
52        installcheck-recursive installdirs-recursive pdf-recursive \
53        ps-recursive uninstall-recursive
54am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
55am__vpath_adj = case $$p in \
56    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
57    *) f=$$p;; \
58  esac;
59am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
60am__install_max = 40
61am__nobase_strip_setup = \
62  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
63am__nobase_strip = \
64  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
65am__nobase_list = $(am__nobase_strip_setup); \
66  for p in $$list; do echo "$$p $$p"; done | \
67  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
68  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
69    if (++n[$$2] == $(am__install_max)) \
70      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
71    END { for (dir in files) print dir, files[dir] }'
72am__base_list = \
73  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
74  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
75am__installdirs = "$(DESTDIR)$(omfdir)" "$(DESTDIR)$(xmldir)"
76DATA = $(omf_DATA) $(xml_DATA)
77RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
78  distclean-recursive maintainer-clean-recursive
79AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
80        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
81        distdir
82ETAGS = etags
83CTAGS = ctags
84DIST_SUBDIRS = $(SUBDIRS)
85DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
86am__relativize = \
87  dir0=`pwd`; \
88  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
89  sed_rest='s,^[^/]*/*,,'; \
90  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
91  sed_butlast='s,/*[^/]*$$,,'; \
92  while test -n "$$dir1"; do \
93    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
94    if test "$$first" != "."; then \
95      if test "$$first" = ".."; then \
96        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
97        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
98      else \
99        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
100        if test "$$first2" = "$$first"; then \
101          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
102        else \
103          dir2="../$$dir2"; \
104        fi; \
105        dir0="$$dir0"/"$$first"; \
106      fi; \
107    fi; \
108    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
109  done; \
110  reldir="$$dir2"
111ACLOCAL = @ACLOCAL@
112AMTAR = @AMTAR@
113AUTOCONF = @AUTOCONF@
114AUTOHEADER = @AUTOHEADER@
115AUTOMAKE = @AUTOMAKE@
116AWK = @AWK@
117CYGPATH_W = @CYGPATH_W@
118DEFS = @DEFS@
119ECHO_C = @ECHO_C@
120ECHO_N = @ECHO_N@
121ECHO_T = @ECHO_T@
122INSTALL = @INSTALL@
123INSTALL_DATA = @INSTALL_DATA@
124INSTALL_PROGRAM = @INSTALL_PROGRAM@
125INSTALL_SCRIPT = @INSTALL_SCRIPT@
126INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
127LIBOBJS = @LIBOBJS@
128LIBS = @LIBS@
129LTLIBOBJS = @LTLIBOBJS@
130MAKEINFO = @MAKEINFO@
131MKDIR_P = @MKDIR_P@
132OMFDIR = @OMFDIR@
133PACKAGE = @PACKAGE@
134PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
135PACKAGE_NAME = @PACKAGE_NAME@
136PACKAGE_STRING = @PACKAGE_STRING@
137PACKAGE_TARNAME = @PACKAGE_TARNAME@
138PACKAGE_URL = @PACKAGE_URL@
139PACKAGE_VERSION = @PACKAGE_VERSION@
140PATH_SEPARATOR = @PATH_SEPARATOR@
141PKG_CONFIG = @PKG_CONFIG@
142PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
143PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
144SET_MAKE = @SET_MAKE@
145SHELL = @SHELL@
146STRIP = @STRIP@
147VERSION = @VERSION@
148VMDIR = @VMDIR@
149abs_builddir = @abs_builddir@
150abs_srcdir = @abs_srcdir@
151abs_top_builddir = @abs_top_builddir@
152abs_top_srcdir = @abs_top_srcdir@
153am__leading_dot = @am__leading_dot@
154am__tar = @am__tar@
155am__untar = @am__untar@
156bindir = @bindir@
157build_alias = @build_alias@
158builddir = @builddir@
159datadir = @datadir@
160datarootdir = @datarootdir@
161docdir = @docdir@
162dvidir = @dvidir@
163exec_prefix = @exec_prefix@
164host_alias = @host_alias@
165htmldir = @htmldir@
166includedir = @includedir@
167infodir = @infodir@
168install_sh = @install_sh@
169libdir = @libdir@
170libexecdir = @libexecdir@
171localedir = @localedir@
172localstatedir = @localstatedir@
173mandir = @mandir@
174mkdir_p = @mkdir_p@
175oldincludedir = @oldincludedir@
176pdfdir = @pdfdir@
177prefix = @prefix@
178program_transform_name = @program_transform_name@
179psdir = @psdir@
180sbindir = @sbindir@
181sharedstatedir = @sharedstatedir@
182srcdir = @srcdir@
183sysconfdir = @sysconfdir@
184target_alias = @target_alias@
185top_build_prefix = @top_build_prefix@
186top_builddir = @top_builddir@
187top_srcdir = @top_srcdir@
188SUBDIRS = figures
189@NO_WEB_TRUE@omf_DATA = vine-desktop-guide-ja.omf
190@NO_WEB_TRUE@omfdir = @OMFDIR@
191@NO_WEB_TRUE@xml_DATA = accessibility-features.xml \
192@NO_WEB_TRUE@      accessories.xml \
193@NO_WEB_TRUE@      boot.xml \
194@NO_WEB_TRUE@      gnome-basic.xml \
195@NO_WEB_TRUE@      graphics.xml \
196@NO_WEB_TRUE@      gui-alternatives.xml \
197@NO_WEB_TRUE@      internet.xml \
198@NO_WEB_TRUE@      legal.xml \
199@NO_WEB_TRUE@      login.xml \
200@NO_WEB_TRUE@      logout.xml \
201@NO_WEB_TRUE@      preferences.xml \
202@NO_WEB_TRUE@      recruitment.xml \
203@NO_WEB_TRUE@      rules.xml \
204@NO_WEB_TRUE@      scim-anthy.xml \
205@NO_WEB_TRUE@      shutdown.xml \
206@NO_WEB_TRUE@      sound-video.xml \
207@NO_WEB_TRUE@      synaptic.xml \
208@NO_WEB_TRUE@      system-config.xml \
209@NO_WEB_TRUE@      system-tool.xml \
210@NO_WEB_TRUE@      update-watch.xml \
211@NO_WEB_TRUE@      vine-desktop-guide.xml
212
213@NO_WEB_TRUE@xmldir = @VMDIR@/desktop-guide
214EXTRA_DIST = $(xml_DATA)
215CLEANFILES = *.html
216all: all-recursive
217
218.SUFFIXES:
219$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
220        @for dep in $?; do \
221          case '$(am__configure_deps)' in \
222            *$$dep*) \
223              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
224                && { if test -f $@; then exit 0; else break; fi; }; \
225              exit 1;; \
226          esac; \
227        done; \
228        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \
229        $(am__cd) $(top_srcdir) && \
230          $(AUTOMAKE) --gnu help/Makefile
231.PRECIOUS: Makefile
232Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
233        @case '$?' in \
234          *config.status*) \
235            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
236          *) \
237            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
238            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
239        esac;
240
241$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
242        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
243
244$(top_srcdir)/configure:  $(am__configure_deps)
245        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
246$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
247        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
248$(am__aclocal_m4_deps):
249vine-desktop-guide-ja.omf: $(top_builddir)/config.status $(srcdir)/vine-desktop-guide-ja.omf.in
250        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
251install-omfDATA: $(omf_DATA)
252        @$(NORMAL_INSTALL)
253        test -z "$(omfdir)" || $(MKDIR_P) "$(DESTDIR)$(omfdir)"
254        @list='$(omf_DATA)'; test -n "$(omfdir)" || list=; \
255        for p in $$list; do \
256          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
257          echo "$$d$$p"; \
258        done | $(am__base_list) | \
259        while read files; do \
260          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(omfdir)'"; \
261          $(INSTALL_DATA) $$files "$(DESTDIR)$(omfdir)" || exit $$?; \
262        done
263
264uninstall-omfDATA:
265        @$(NORMAL_UNINSTALL)
266        @list='$(omf_DATA)'; test -n "$(omfdir)" || list=; \
267        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
268        test -n "$$files" || exit 0; \
269        echo " ( cd '$(DESTDIR)$(omfdir)' && rm -f" $$files ")"; \
270        cd "$(DESTDIR)$(omfdir)" && rm -f $$files
271install-xmlDATA: $(xml_DATA)
272        @$(NORMAL_INSTALL)
273        test -z "$(xmldir)" || $(MKDIR_P) "$(DESTDIR)$(xmldir)"
274        @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
275        for p in $$list; do \
276          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
277          echo "$$d$$p"; \
278        done | $(am__base_list) | \
279        while read files; do \
280          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xmldir)'"; \
281          $(INSTALL_DATA) $$files "$(DESTDIR)$(xmldir)" || exit $$?; \
282        done
283
284uninstall-xmlDATA:
285        @$(NORMAL_UNINSTALL)
286        @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
287        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
288        test -n "$$files" || exit 0; \
289        echo " ( cd '$(DESTDIR)$(xmldir)' && rm -f" $$files ")"; \
290        cd "$(DESTDIR)$(xmldir)" && rm -f $$files
291
292# This directory's subdirectories are mostly independent; you can cd
293# into them and run `make' without going through this Makefile.
294# To change the values of `make' variables: instead of editing Makefiles,
295# (1) if the variable is set in `config.status', edit `config.status'
296#     (which will cause the Makefiles to be regenerated when you run `make');
297# (2) otherwise, pass the desired values on the `make' command line.
298$(RECURSIVE_TARGETS):
299        @fail= failcom='exit 1'; \
300        for f in x $$MAKEFLAGS; do \
301          case $$f in \
302            *=* | --[!k]*);; \
303            *k*) failcom='fail=yes';; \
304          esac; \
305        done; \
306        dot_seen=no; \
307        target=`echo $@ | sed s/-recursive//`; \
308        list='$(SUBDIRS)'; for subdir in $$list; do \
309          echo "Making $$target in $$subdir"; \
310          if test "$$subdir" = "."; then \
311            dot_seen=yes; \
312            local_target="$$target-am"; \
313          else \
314            local_target="$$target"; \
315          fi; \
316          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
317          || eval $$failcom; \
318        done; \
319        if test "$$dot_seen" = "no"; then \
320          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
321        fi; test -z "$$fail"
322
323$(RECURSIVE_CLEAN_TARGETS):
324        @fail= failcom='exit 1'; \
325        for f in x $$MAKEFLAGS; do \
326          case $$f in \
327            *=* | --[!k]*);; \
328            *k*) failcom='fail=yes';; \
329          esac; \
330        done; \
331        dot_seen=no; \
332        case "$@" in \
333          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
334          *) list='$(SUBDIRS)' ;; \
335        esac; \
336        rev=''; for subdir in $$list; do \
337          if test "$$subdir" = "."; then :; else \
338            rev="$$subdir $$rev"; \
339          fi; \
340        done; \
341        rev="$$rev ."; \
342        target=`echo $@ | sed s/-recursive//`; \
343        for subdir in $$rev; do \
344          echo "Making $$target in $$subdir"; \
345          if test "$$subdir" = "."; then \
346            local_target="$$target-am"; \
347          else \
348            local_target="$$target"; \
349          fi; \
350          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
351          || eval $$failcom; \
352        done && test -z "$$fail"
353tags-recursive:
354        list='$(SUBDIRS)'; for subdir in $$list; do \
355          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
356        done
357ctags-recursive:
358        list='$(SUBDIRS)'; for subdir in $$list; do \
359          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
360        done
361
362ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
363        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
364        unique=`for i in $$list; do \
365            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
366          done | \
367          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
368              END { if (nonempty) { for (i in files) print i; }; }'`; \
369        mkid -fID $$unique
370tags: TAGS
371
372TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
373                $(TAGS_FILES) $(LISP)
374        set x; \
375        here=`pwd`; \
376        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
377          include_option=--etags-include; \
378          empty_fix=.; \
379        else \
380          include_option=--include; \
381          empty_fix=; \
382        fi; \
383        list='$(SUBDIRS)'; for subdir in $$list; do \
384          if test "$$subdir" = .; then :; else \
385            test ! -f $$subdir/TAGS || \
386              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
387          fi; \
388        done; \
389        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
390        unique=`for i in $$list; do \
391            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
392          done | \
393          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
394              END { if (nonempty) { for (i in files) print i; }; }'`; \
395        shift; \
396        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
397          test -n "$$unique" || unique=$$empty_fix; \
398          if test $$# -gt 0; then \
399            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
400              "$$@" $$unique; \
401          else \
402            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
403              $$unique; \
404          fi; \
405        fi
406ctags: CTAGS
407CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
408                $(TAGS_FILES) $(LISP)
409        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
410        unique=`for i in $$list; do \
411            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
412          done | \
413          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
414              END { if (nonempty) { for (i in files) print i; }; }'`; \
415        test -z "$(CTAGS_ARGS)$$unique" \
416          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
417             $$unique
418
419GTAGS:
420        here=`$(am__cd) $(top_builddir) && pwd` \
421          && $(am__cd) $(top_srcdir) \
422          && gtags -i $(GTAGS_ARGS) "$$here"
423
424distclean-tags:
425        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
426
427distdir: $(DISTFILES)
428        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
429        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
430        list='$(DISTFILES)'; \
431          dist_files=`for file in $$list; do echo $$file; done | \
432          sed -e "s|^$$srcdirstrip/||;t" \
433              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
434        case $$dist_files in \
435          */*) $(MKDIR_P) `echo "$$dist_files" | \
436                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
437                           sort -u` ;; \
438        esac; \
439        for file in $$dist_files; do \
440          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
441          if test -d $$d/$$file; then \
442            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
443            if test -d "$(distdir)/$$file"; then \
444              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
445            fi; \
446            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
447              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
448              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
449            fi; \
450            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
451          else \
452            test -f "$(distdir)/$$file" \
453            || cp -p $$d/$$file "$(distdir)/$$file" \
454            || exit 1; \
455          fi; \
456        done
457        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
458          if test "$$subdir" = .; then :; else \
459            test -d "$(distdir)/$$subdir" \
460            || $(MKDIR_P) "$(distdir)/$$subdir" \
461            || exit 1; \
462          fi; \
463        done
464        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
465          if test "$$subdir" = .; then :; else \
466            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
467            $(am__relativize); \
468            new_distdir=$$reldir; \
469            dir1=$$subdir; dir2="$(top_distdir)"; \
470            $(am__relativize); \
471            new_top_distdir=$$reldir; \
472            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
473            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
474            ($(am__cd) $$subdir && \
475              $(MAKE) $(AM_MAKEFLAGS) \
476                top_distdir="$$new_top_distdir" \
477                distdir="$$new_distdir" \
478                am__remove_distdir=: \
479                am__skip_length_check=: \
480                am__skip_mode_fix=: \
481                distdir) \
482              || exit 1; \
483          fi; \
484        done
485check-am: all-am
486check: check-recursive
487all-am: Makefile $(DATA)
488installdirs: installdirs-recursive
489installdirs-am:
490        for dir in "$(DESTDIR)$(omfdir)" "$(DESTDIR)$(xmldir)"; do \
491          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
492        done
493install: install-recursive
494install-exec: install-exec-recursive
495install-data: install-data-recursive
496uninstall: uninstall-recursive
497
498install-am: all-am
499        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
500
501installcheck: installcheck-recursive
502install-strip:
503        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
504          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
505          `test -z '$(STRIP)' || \
506            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
507mostlyclean-generic:
508
509clean-generic:
510        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
511
512distclean-generic:
513        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
514        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
515
516maintainer-clean-generic:
517        @echo "This command is intended for maintainers to use"
518        @echo "it deletes files that may require special tools to rebuild."
519clean: clean-recursive
520
521clean-am: clean-generic mostlyclean-am
522
523distclean: distclean-recursive
524        -rm -f Makefile
525distclean-am: clean-am distclean-generic distclean-tags
526
527dvi: dvi-recursive
528
529dvi-am:
530
531html-am:
532
533info: info-recursive
534
535info-am:
536
537install-data-am: install-omfDATA install-xmlDATA
538
539install-dvi: install-dvi-recursive
540
541install-dvi-am:
542
543install-exec-am:
544
545install-html-am:
546
547install-info: install-info-recursive
548
549install-info-am:
550
551install-man:
552
553install-pdf: install-pdf-recursive
554
555install-pdf-am:
556
557install-ps: install-ps-recursive
558
559install-ps-am:
560
561installcheck-am:
562
563maintainer-clean: maintainer-clean-recursive
564        -rm -f Makefile
565maintainer-clean-am: distclean-am maintainer-clean-generic
566
567mostlyclean: mostlyclean-recursive
568
569mostlyclean-am: mostlyclean-generic
570
571pdf: pdf-recursive
572
573pdf-am:
574
575ps: ps-recursive
576
577ps-am:
578
579uninstall-am: uninstall-omfDATA uninstall-xmlDATA
580
581.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
582        install-am install-strip tags-recursive
583
584.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
585        all all-am check check-am clean clean-generic ctags \
586        ctags-recursive distclean distclean-generic distclean-tags \
587        distdir dvi dvi-am html html-am info info-am install \
588        install-am install-data install-data-am install-dvi \
589        install-dvi-am install-exec install-exec-am install-html \
590        install-html-am install-info install-info-am install-man \
591        install-omfDATA install-pdf install-pdf-am install-ps \
592        install-ps-am install-strip install-xmlDATA installcheck \
593        installcheck-am installdirs installdirs-am maintainer-clean \
594        maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
595        pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
596        uninstall-omfDATA uninstall-xmlDATA
597
598
599html:
600        vine-manual-build vine-desktop-guide.xml
601
602install-html:
603        $(INSTALL) -d $(DESTDIR)$(xmldir)
604        $(INSTALL) -m 644 *.html $(DESTDIR)$(xmldir)
605
606# Tell versions [3.59,3.63) of GNU make to not export all variables.
607# Otherwise a system limit (for SysV at least) may be exceeded.
608.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.