source: projects/vine-desktop-guide/branches/vl6/help/Makefile.in @ 7099

Revision 7099, 19.4 KB checked in by yasumichi, 11 years ago (diff)

include kernel-pae.xml
Line 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkglibexecdir = $(libexecdir)/@PACKAGE@
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24install_sh_DATA = $(install_sh) -c -m 644
25install_sh_PROGRAM = $(install_sh) -c
26install_sh_SCRIPT = $(install_sh) -c
27INSTALL_HEADER = $(INSTALL_DATA)
28transform = $(program_transform_name)
29NORMAL_INSTALL = :
30PRE_INSTALL = :
31POST_INSTALL = :
32NORMAL_UNINSTALL = :
33PRE_UNINSTALL = :
34POST_UNINSTALL = :
35subdir = help
36DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
37        $(srcdir)/vine-desktop-guide-ja.omf.in
38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39am__aclocal_m4_deps = $(top_srcdir)/configure.ac
40am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
41        $(ACLOCAL_M4)
42mkinstalldirs = $(install_sh) -d
43CONFIG_CLEAN_FILES = vine-desktop-guide-ja.omf
44CONFIG_CLEAN_VPATH_FILES =
45SOURCES =
46DIST_SOURCES =
47RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
48        html-recursive info-recursive install-data-recursive \
49        install-dvi-recursive install-exec-recursive \
50        install-html-recursive install-info-recursive \
51        install-pdf-recursive install-ps-recursive install-recursive \
52        installcheck-recursive installdirs-recursive pdf-recursive \
53        ps-recursive uninstall-recursive
54am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
55am__vpath_adj = case $$p in \
56    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
57    *) f=$$p;; \
58  esac;
59am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
60am__install_max = 40
61am__nobase_strip_setup = \
62  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
63am__nobase_strip = \
64  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
65am__nobase_list = $(am__nobase_strip_setup); \
66  for p in $$list; do echo "$$p $$p"; done | \
67  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
68  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
69    if (++n[$$2] == $(am__install_max)) \
70      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
71    END { for (dir in files) print dir, files[dir] }'
72am__base_list = \
73  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
74  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
75am__installdirs = "$(DESTDIR)$(omfdir)" "$(DESTDIR)$(xmldir)"
76DATA = $(omf_DATA) $(xml_DATA)
77RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
78  distclean-recursive maintainer-clean-recursive
79AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
80        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
81        distdir
82ETAGS = etags
83CTAGS = ctags
84DIST_SUBDIRS = $(SUBDIRS)
85DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
86am__relativize = \
87  dir0=`pwd`; \
88  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
89  sed_rest='s,^[^/]*/*,,'; \
90  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
91  sed_butlast='s,/*[^/]*$$,,'; \
92  while test -n "$$dir1"; do \
93    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
94    if test "$$first" != "."; then \
95      if test "$$first" = ".."; then \
96        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
97        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
98      else \
99        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
100        if test "$$first2" = "$$first"; then \
101          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
102        else \
103          dir2="../$$dir2"; \
104        fi; \
105        dir0="$$dir0"/"$$first"; \
106      fi; \
107    fi; \
108    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
109  done; \
110  reldir="$$dir2"
111ACLOCAL = @ACLOCAL@
112AMTAR = @AMTAR@
113AUTOCONF = @AUTOCONF@
114AUTOHEADER = @AUTOHEADER@
115AUTOMAKE = @AUTOMAKE@
116AWK = @AWK@
117CYGPATH_W = @CYGPATH_W@
118DEFS = @DEFS@
119ECHO_C = @ECHO_C@
120ECHO_N = @ECHO_N@
121ECHO_T = @ECHO_T@
122INSTALL = @INSTALL@
123INSTALL_DATA = @INSTALL_DATA@
124INSTALL_PROGRAM = @INSTALL_PROGRAM@
125INSTALL_SCRIPT = @INSTALL_SCRIPT@
126INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
127LIBOBJS = @LIBOBJS@
128LIBS = @LIBS@
129LTLIBOBJS = @LTLIBOBJS@
130MAKEINFO = @MAKEINFO@
131MKDIR_P = @MKDIR_P@
132OMFDIR = @OMFDIR@
133PACKAGE = @PACKAGE@
134PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
135PACKAGE_NAME = @PACKAGE_NAME@
136PACKAGE_STRING = @PACKAGE_STRING@
137PACKAGE_TARNAME = @PACKAGE_TARNAME@
138PACKAGE_URL = @PACKAGE_URL@
139PACKAGE_VERSION = @PACKAGE_VERSION@
140PATH_SEPARATOR = @PATH_SEPARATOR@
141PKG_CONFIG = @PKG_CONFIG@
142PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
143PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
144SET_MAKE = @SET_MAKE@
145SHELL = @SHELL@
146STRIP = @STRIP@
147VERSION = @VERSION@
148VMDIR = @VMDIR@
149abs_builddir = @abs_builddir@
150abs_srcdir = @abs_srcdir@
151abs_top_builddir = @abs_top_builddir@
152abs_top_srcdir = @abs_top_srcdir@
153am__leading_dot = @am__leading_dot@
154am__tar = @am__tar@
155am__untar = @am__untar@
156bindir = @bindir@
157build_alias = @build_alias@
158builddir = @builddir@
159datadir = @datadir@
160datarootdir = @datarootdir@
161docdir = @docdir@
162dvidir = @dvidir@
163exec_prefix = @exec_prefix@
164host_alias = @host_alias@
165htmldir = @htmldir@
166includedir = @includedir@
167infodir = @infodir@
168install_sh = @install_sh@
169libdir = @libdir@
170libexecdir = @libexecdir@
171localedir = @localedir@
172localstatedir = @localstatedir@
173mandir = @mandir@
174mkdir_p = @mkdir_p@
175oldincludedir = @oldincludedir@
176pdfdir = @pdfdir@
177prefix = @prefix@
178program_transform_name = @program_transform_name@
179psdir = @psdir@
180sbindir = @sbindir@
181sharedstatedir = @sharedstatedir@
182srcdir = @srcdir@
183sysconfdir = @sysconfdir@
184target_alias = @target_alias@
185top_build_prefix = @top_build_prefix@
186top_builddir = @top_builddir@
187top_srcdir = @top_srcdir@
188SUBDIRS = figures
189@NO_WEB_TRUE@omf_DATA = vine-desktop-guide-ja.omf
190@NO_WEB_TRUE@omfdir = @OMFDIR@
191@NO_WEB_TRUE@xml_DATA = accessibility-features.xml \
192@NO_WEB_TRUE@      accessories.xml \
193@NO_WEB_TRUE@      boot.xml \
194@NO_WEB_TRUE@      gnome-basic.xml \
195@NO_WEB_TRUE@      graphics.xml \
196@NO_WEB_TRUE@      gui-alternatives.xml \
197@NO_WEB_TRUE@      internet.xml \
198@NO_WEB_TRUE@      kernel-pae.xml \
199@NO_WEB_TRUE@      legal.xml \
200@NO_WEB_TRUE@      login.xml \
201@NO_WEB_TRUE@      logout.xml \
202@NO_WEB_TRUE@      NetworkManager.xml \
203@NO_WEB_TRUE@      office.xml \
204@NO_WEB_TRUE@      preferences.xml \
205@NO_WEB_TRUE@      programming.xml \
206@NO_WEB_TRUE@      recruitment.xml \
207@NO_WEB_TRUE@      rules.xml \
208@NO_WEB_TRUE@      sound-video.xml \
209@NO_WEB_TRUE@      synaptic.xml \
210@NO_WEB_TRUE@      system-config.xml \
211@NO_WEB_TRUE@      system-tool.xml \
212@NO_WEB_TRUE@      update-watch.xml \
213@NO_WEB_TRUE@      vine-app-install.xml \
214@NO_WEB_TRUE@      vine-plus-guide.xml \
215@NO_WEB_TRUE@      vine-desktop-guide.xml
216
217@NO_WEB_TRUE@xmldir = @VMDIR@/desktop-guide
218EXTRA_DIST = $(xml_DATA)
219CLEANFILES = *.html
220all: all-recursive
221
222.SUFFIXES:
223$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
224        @for dep in $?; do \
225          case '$(am__configure_deps)' in \
226            *$$dep*) \
227              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
228                && { if test -f $@; then exit 0; else break; fi; }; \
229              exit 1;; \
230          esac; \
231        done; \
232        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \
233        $(am__cd) $(top_srcdir) && \
234          $(AUTOMAKE) --gnu help/Makefile
235.PRECIOUS: Makefile
236Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
237        @case '$?' in \
238          *config.status*) \
239            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
240          *) \
241            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
242            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
243        esac;
244
245$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
246        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
247
248$(top_srcdir)/configure:  $(am__configure_deps)
249        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
250$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
251        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
252$(am__aclocal_m4_deps):
253vine-desktop-guide-ja.omf: $(top_builddir)/config.status $(srcdir)/vine-desktop-guide-ja.omf.in
254        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
255install-omfDATA: $(omf_DATA)
256        @$(NORMAL_INSTALL)
257        test -z "$(omfdir)" || $(MKDIR_P) "$(DESTDIR)$(omfdir)"
258        @list='$(omf_DATA)'; test -n "$(omfdir)" || list=; \
259        for p in $$list; do \
260          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
261          echo "$$d$$p"; \
262        done | $(am__base_list) | \
263        while read files; do \
264          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(omfdir)'"; \
265          $(INSTALL_DATA) $$files "$(DESTDIR)$(omfdir)" || exit $$?; \
266        done
267
268uninstall-omfDATA:
269        @$(NORMAL_UNINSTALL)
270        @list='$(omf_DATA)'; test -n "$(omfdir)" || list=; \
271        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
272        test -n "$$files" || exit 0; \
273        echo " ( cd '$(DESTDIR)$(omfdir)' && rm -f" $$files ")"; \
274        cd "$(DESTDIR)$(omfdir)" && rm -f $$files
275install-xmlDATA: $(xml_DATA)
276        @$(NORMAL_INSTALL)
277        test -z "$(xmldir)" || $(MKDIR_P) "$(DESTDIR)$(xmldir)"
278        @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
279        for p in $$list; do \
280          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
281          echo "$$d$$p"; \
282        done | $(am__base_list) | \
283        while read files; do \
284          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xmldir)'"; \
285          $(INSTALL_DATA) $$files "$(DESTDIR)$(xmldir)" || exit $$?; \
286        done
287
288uninstall-xmlDATA:
289        @$(NORMAL_UNINSTALL)
290        @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
291        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
292        test -n "$$files" || exit 0; \
293        echo " ( cd '$(DESTDIR)$(xmldir)' && rm -f" $$files ")"; \
294        cd "$(DESTDIR)$(xmldir)" && rm -f $$files
295
296# This directory's subdirectories are mostly independent; you can cd
297# into them and run `make' without going through this Makefile.
298# To change the values of `make' variables: instead of editing Makefiles,
299# (1) if the variable is set in `config.status', edit `config.status'
300#     (which will cause the Makefiles to be regenerated when you run `make');
301# (2) otherwise, pass the desired values on the `make' command line.
302$(RECURSIVE_TARGETS):
303        @fail= failcom='exit 1'; \
304        for f in x $$MAKEFLAGS; do \
305          case $$f in \
306            *=* | --[!k]*);; \
307            *k*) failcom='fail=yes';; \
308          esac; \
309        done; \
310        dot_seen=no; \
311        target=`echo $@ | sed s/-recursive//`; \
312        list='$(SUBDIRS)'; for subdir in $$list; do \
313          echo "Making $$target in $$subdir"; \
314          if test "$$subdir" = "."; then \
315            dot_seen=yes; \
316            local_target="$$target-am"; \
317          else \
318            local_target="$$target"; \
319          fi; \
320          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
321          || eval $$failcom; \
322        done; \
323        if test "$$dot_seen" = "no"; then \
324          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
325        fi; test -z "$$fail"
326
327$(RECURSIVE_CLEAN_TARGETS):
328        @fail= failcom='exit 1'; \
329        for f in x $$MAKEFLAGS; do \
330          case $$f in \
331            *=* | --[!k]*);; \
332            *k*) failcom='fail=yes';; \
333          esac; \
334        done; \
335        dot_seen=no; \
336        case "$@" in \
337          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
338          *) list='$(SUBDIRS)' ;; \
339        esac; \
340        rev=''; for subdir in $$list; do \
341          if test "$$subdir" = "."; then :; else \
342            rev="$$subdir $$rev"; \
343          fi; \
344        done; \
345        rev="$$rev ."; \
346        target=`echo $@ | sed s/-recursive//`; \
347        for subdir in $$rev; do \
348          echo "Making $$target in $$subdir"; \
349          if test "$$subdir" = "."; then \
350            local_target="$$target-am"; \
351          else \
352            local_target="$$target"; \
353          fi; \
354          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
355          || eval $$failcom; \
356        done && test -z "$$fail"
357tags-recursive:
358        list='$(SUBDIRS)'; for subdir in $$list; do \
359          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
360        done
361ctags-recursive:
362        list='$(SUBDIRS)'; for subdir in $$list; do \
363          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
364        done
365
366ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
367        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
368        unique=`for i in $$list; do \
369            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
370          done | \
371          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
372              END { if (nonempty) { for (i in files) print i; }; }'`; \
373        mkid -fID $$unique
374tags: TAGS
375
376TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
377                $(TAGS_FILES) $(LISP)
378        set x; \
379        here=`pwd`; \
380        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
381          include_option=--etags-include; \
382          empty_fix=.; \
383        else \
384          include_option=--include; \
385          empty_fix=; \
386        fi; \
387        list='$(SUBDIRS)'; for subdir in $$list; do \
388          if test "$$subdir" = .; then :; else \
389            test ! -f $$subdir/TAGS || \
390              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
391          fi; \
392        done; \
393        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
394        unique=`for i in $$list; do \
395            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
396          done | \
397          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
398              END { if (nonempty) { for (i in files) print i; }; }'`; \
399        shift; \
400        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
401          test -n "$$unique" || unique=$$empty_fix; \
402          if test $$# -gt 0; then \
403            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
404              "$$@" $$unique; \
405          else \
406            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
407              $$unique; \
408          fi; \
409        fi
410ctags: CTAGS
411CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
412                $(TAGS_FILES) $(LISP)
413        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
414        unique=`for i in $$list; do \
415            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
416          done | \
417          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
418              END { if (nonempty) { for (i in files) print i; }; }'`; \
419        test -z "$(CTAGS_ARGS)$$unique" \
420          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
421             $$unique
422
423GTAGS:
424        here=`$(am__cd) $(top_builddir) && pwd` \
425          && $(am__cd) $(top_srcdir) \
426          && gtags -i $(GTAGS_ARGS) "$$here"
427
428distclean-tags:
429        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
430
431distdir: $(DISTFILES)
432        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
433        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
434        list='$(DISTFILES)'; \
435          dist_files=`for file in $$list; do echo $$file; done | \
436          sed -e "s|^$$srcdirstrip/||;t" \
437              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
438        case $$dist_files in \
439          */*) $(MKDIR_P) `echo "$$dist_files" | \
440                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
441                           sort -u` ;; \
442        esac; \
443        for file in $$dist_files; do \
444          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
445          if test -d $$d/$$file; then \
446            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
447            if test -d "$(distdir)/$$file"; then \
448              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
449            fi; \
450            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
451              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
452              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
453            fi; \
454            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
455          else \
456            test -f "$(distdir)/$$file" \
457            || cp -p $$d/$$file "$(distdir)/$$file" \
458            || exit 1; \
459          fi; \
460        done
461        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
462          if test "$$subdir" = .; then :; else \
463            test -d "$(distdir)/$$subdir" \
464            || $(MKDIR_P) "$(distdir)/$$subdir" \
465            || exit 1; \
466          fi; \
467        done
468        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
469          if test "$$subdir" = .; then :; else \
470            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
471            $(am__relativize); \
472            new_distdir=$$reldir; \
473            dir1=$$subdir; dir2="$(top_distdir)"; \
474            $(am__relativize); \
475            new_top_distdir=$$reldir; \
476            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
477            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
478            ($(am__cd) $$subdir && \
479              $(MAKE) $(AM_MAKEFLAGS) \
480                top_distdir="$$new_top_distdir" \
481                distdir="$$new_distdir" \
482                am__remove_distdir=: \
483                am__skip_length_check=: \
484                am__skip_mode_fix=: \
485                distdir) \
486              || exit 1; \
487          fi; \
488        done
489check-am: all-am
490check: check-recursive
491all-am: Makefile $(DATA)
492installdirs: installdirs-recursive
493installdirs-am:
494        for dir in "$(DESTDIR)$(omfdir)" "$(DESTDIR)$(xmldir)"; do \
495          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
496        done
497install: install-recursive
498install-exec: install-exec-recursive
499install-data: install-data-recursive
500uninstall: uninstall-recursive
501
502install-am: all-am
503        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
504
505installcheck: installcheck-recursive
506install-strip:
507        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
508          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
509          `test -z '$(STRIP)' || \
510            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
511mostlyclean-generic:
512
513clean-generic:
514        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
515
516distclean-generic:
517        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
518        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
519
520maintainer-clean-generic:
521        @echo "This command is intended for maintainers to use"
522        @echo "it deletes files that may require special tools to rebuild."
523clean: clean-recursive
524
525clean-am: clean-generic mostlyclean-am
526
527distclean: distclean-recursive
528        -rm -f Makefile
529distclean-am: clean-am distclean-generic distclean-tags
530
531dvi: dvi-recursive
532
533dvi-am:
534
535html-am:
536
537info: info-recursive
538
539info-am:
540
541install-data-am: install-omfDATA install-xmlDATA
542
543install-dvi: install-dvi-recursive
544
545install-dvi-am:
546
547install-exec-am:
548
549install-html-am:
550
551install-info: install-info-recursive
552
553install-info-am:
554
555install-man:
556
557install-pdf: install-pdf-recursive
558
559install-pdf-am:
560
561install-ps: install-ps-recursive
562
563install-ps-am:
564
565installcheck-am:
566
567maintainer-clean: maintainer-clean-recursive
568        -rm -f Makefile
569maintainer-clean-am: distclean-am maintainer-clean-generic
570
571mostlyclean: mostlyclean-recursive
572
573mostlyclean-am: mostlyclean-generic
574
575pdf: pdf-recursive
576
577pdf-am:
578
579ps: ps-recursive
580
581ps-am:
582
583uninstall-am: uninstall-omfDATA uninstall-xmlDATA
584
585.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
586        install-am install-strip tags-recursive
587
588.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
589        all all-am check check-am clean clean-generic ctags \
590        ctags-recursive distclean distclean-generic distclean-tags \
591        distdir dvi dvi-am html html-am info info-am install \
592        install-am install-data install-data-am install-dvi \
593        install-dvi-am install-exec install-exec-am install-html \
594        install-html-am install-info install-info-am install-man \
595        install-omfDATA install-pdf install-pdf-am install-ps \
596        install-ps-am install-strip install-xmlDATA installcheck \
597        installcheck-am installdirs installdirs-am maintainer-clean \
598        maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
599        pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
600        uninstall-omfDATA uninstall-xmlDATA
601
602
603html:
604        vine-manual-build vine-desktop-guide.xml
605
606install-html:
607        $(INSTALL) -d $(DESTDIR)$(xmldir)
608        $(INSTALL) -m 644 *.html $(DESTDIR)$(xmldir)
609
610# Tell versions [3.59,3.63) of GNU make to not export all variables.
611# Otherwise a system limit (for SysV at least) may be exceeded.
612.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.