[1108] | 1 | #!/bin/sh |
---|
| 2 | # |
---|
| 3 | # ip-down.ipv6to4 |
---|
| 4 | # |
---|
| 5 | # |
---|
| 6 | # Taken from: |
---|
| 7 | # (P) & (C) 2000-2005 by Peter Bieringer <pb@bieringer.de> |
---|
| 8 | # |
---|
| 9 | # You will find more information on the initscripts-ipv6 homepage at |
---|
| 10 | # http://www.deepspace6.net/projects/initscripts-ipv6.html |
---|
| 11 | # |
---|
| 12 | # Version 2005-09-22 |
---|
| 13 | # |
---|
| 14 | # Calling parameters: |
---|
| 15 | # $1: interface name |
---|
| 16 | # |
---|
| 17 | # Called (mostly) by /etc/ppp/ip-down.local |
---|
| 18 | # like: /etc/ppp/ip-down.ipv6to4 $1 >>/var/log/ppp-ipv6to4.log 2>&1 |
---|
| 19 | # |
---|
| 20 | # Note: this script will *check* whether the existing 6to4 tunnel |
---|
| 21 | # was set before by using "ip-up.ipv6to4" comparing IPv4 address |
---|
| 22 | # of device with the generated 6to4 prefix |
---|
| 23 | # |
---|
| 24 | # Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1: |
---|
| 25 | # IPV6TO4INIT=yes|no: controls configuration |
---|
| 26 | # IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup additional interfaces |
---|
| 27 | # |
---|
| 28 | # IPV6_CONTROL_RADVD=yes|no: controls radvd triggering |
---|
| 29 | # IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid" |
---|
| 30 | # IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP) |
---|
| 31 | # |
---|
| 32 | |
---|
| 33 | |
---|
| 34 | if [ -z "$1" ]; then |
---|
| 35 | echo $"Argument 1 is empty but should contain interface name - skip IPv6to4 initialization" |
---|
| 36 | exit 1 |
---|
| 37 | fi |
---|
| 38 | |
---|
| 39 | # Get global network configuration |
---|
| 40 | . /etc/sysconfig/network |
---|
| 41 | |
---|
| 42 | # Source IPv4 helper functions |
---|
| 43 | cd /etc/sysconfig/network-scripts |
---|
| 44 | . ./network-functions |
---|
| 45 | |
---|
| 46 | CONFIG=$1 |
---|
| 47 | [ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG |
---|
| 48 | source_config |
---|
| 49 | |
---|
| 50 | # IPv6 don't need aliases anymore, config is skipped |
---|
| 51 | REALDEVICE=`echo ${DEVICE} | sed 's/:.*//g'` |
---|
| 52 | [ "$DEVICE" != "$REALDEVICE" ] && exit 0 |
---|
| 53 | |
---|
| 54 | if [ ! -f /etc/sysconfig/network-scripts/network-functions-ipv6 ]; then |
---|
| 55 | exit 1 |
---|
| 56 | fi |
---|
| 57 | |
---|
| 58 | . /etc/sysconfig/network-scripts/network-functions-ipv6 |
---|
| 59 | |
---|
| 60 | |
---|
| 61 | # Run basic IPv6 test, if not ok, skip IPv6 initialization |
---|
| 62 | ipv6_test testonly || exit 0 |
---|
| 63 | |
---|
| 64 | # Test status of ppp device |
---|
| 65 | ipv6_test_device_status $DEVICE |
---|
| 66 | if [ $? != 0 -a $? != 11 ]; then |
---|
| 67 | # device doesn't exist or other problem occurs |
---|
| 68 | exit 1 |
---|
| 69 | fi |
---|
| 70 | |
---|
| 71 | # Test status of tun6to4 device |
---|
| 72 | ipv6_test_device_status tun6to4 |
---|
| 73 | if [ $? = 0 -o $? = 11 ]; then |
---|
| 74 | # Device exists |
---|
| 75 | valid6to4config="yes" |
---|
| 76 | |
---|
| 77 | # Get IPv4 address from interface |
---|
| 78 | ipv4addr="`ipv6_get_ipv4addr_of_device $DEVICE`" |
---|
| 79 | if [ -z "$ipv4addr" ]; then |
---|
| 80 | # Has no IPv4 address |
---|
| 81 | valid6to4config="no" |
---|
| 82 | fi |
---|
| 83 | |
---|
| 84 | # Get local IPv4 address of dedicated tunnel |
---|
| 85 | ipv4addr6to4local="`ipv6_get_ipv4addr_of_tunnel tun6to4 local`" |
---|
| 86 | |
---|
| 87 | # IPv6to4 not enabled on this interface? |
---|
| 88 | if [ $IPV6TO4INIT != "yes" ]; then |
---|
| 89 | # Check against configured 6to4 tunnel to see if this interface was regardless used before |
---|
| 90 | if [ "$ipv4addr" != "$ipv4addr6to4local" ]; then |
---|
| 91 | # IPv4 address of interface does't match local tunnel address, interface was not used for current 6to4 setup |
---|
| 92 | valid6to4config="no" |
---|
| 93 | fi |
---|
| 94 | fi |
---|
| 95 | |
---|
| 96 | fi |
---|
| 97 | |
---|
| 98 | if [ "$valid6to4config" = "yes" ]; then |
---|
| 99 | if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then |
---|
| 100 | # Control running radvd |
---|
| 101 | ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE |
---|
| 102 | fi |
---|
| 103 | |
---|
| 104 | if [ -n "$IPV6TO4_ROUTING" ]; then |
---|
| 105 | # Delete routes to local networks |
---|
| 106 | for devsuf in $IPV6TO4_ROUTING; do |
---|
| 107 | dev="`echo $devsuf | awk -F- '{ print $1 }'`" |
---|
| 108 | ipv6_cleanup_6to4_device $dev |
---|
| 109 | done |
---|
| 110 | fi |
---|
| 111 | |
---|
| 112 | # Delete all configured 6to4 address |
---|
| 113 | ipv6_cleanup_6to4_tunnels tun6to4 |
---|
| 114 | fi |
---|